FaucetMATE
Simplifying faucet installation
US Patent #8,490,276
Contact us at (614) 323-1321
NOTE- Wedge must be in the down position when inserting to allow clearance.
Step 2. Locate the rod and tightening ring beneath the sink. Push up and turn rod to engage threads. Continue to tighten until faucet is secured in place.
Step 3. Attach supply lines to the water supply
FaucetMATE for utility tub/sink - Parts and Assembly
FaucetMATE for utility tub/sink- 3 step mounting instructions
Step 1. Slide Bracket brackets to the top of each faucet shank.
Step 2. Position Brackets facing the same direction either directly left or directly right and secure tightly with the PLASTIC and METAL NUTS as shown. Make sure both wedges is in the down position.
Step 1. Hold both wedge and bracket against supply lines, then insert both supply lines and threaded rods through counter holes until faucet in rests flat on counter surface.
NOTE- Wedges must be in the down position when inserting to allow clearance through counter holes.
Step 2. Locate the rods and tightening rings beneath the sink. Push up and turn each rod to engage threads. Continue to tighten until faucet is secured in place.
Step 3. Attach supply lines to the water supply
Step 3. Attach the ends of the supply lines to the faucet shank leaving the other ends unattached
